Change of Consumer Unit

Update consumer units & outdated fuse boards

New 17th Edition Consumer Unit installation for £399 (new consumer unit included)

Upgrading an old consumer unit (or fuse board) to one incorporating two residual current devices (RCDs) is a job that many people will now have to consider. The 17th edition of the wiring regulations requires most circuits in a domestic property to be protected by an RCD.

Don’t fall foul of the latest legal requirements and make sure the electrics in your property are safe

It is often better and a much cheaper option to upgrade the consumer unit rather than alter the existing installation in order to comply with the new regulations.

This is notifiable work and the council must be notified. If you enlist the help of us here at MD Bespoke Solutions all of this will be taken care of for you.

A legal requirement to this type of work is that EVERY circuit must be tested fully before being powered up again, this is something that we have the right tools and expertise to carry out for you.

Once the job is finished, you will receive an installation certificate with all the test results shown. For more information on consumer units and how they operate please click here.

To book our consumer unit upgrade services please call us on 020 8265 2061, we’re available 7 days a week.

Consumer Unit Replacement

From 2001 onwards, all British electrical installations were required to incorporate residual current device (RCD) protection. The main purpose is to make the unit safe when electricity is supplied outdoors. If a fault occurs, the RCD device trips and cuts power.

Even if you don’t have any outdoor sockets, the law says that your consumer unit must feature RCD protection for all cables that are embedded into the wall of the property, with the exception of alarm circuits.

Professional installation is essential to ensure your consumer unit meets the most recent 17th Edition IEE Wiring Regulations.

Our Services

Experienced installers from MD Bespoke Solutions will supply a fully compliant, brand new 17th Edition Consumer Unit. Our fitting price includes the cost of the hardware, and you can book your install 7 days a week.

Once the new consumer unit is fitted, the homeowner will need to notify their local authority of the upgrade and MD Bespoke Solutions can process this notification on your behalf to save you time and hassle. There is no charge for this service, it is all part of our standard service.

The installer will also test the consumer unit and give you a safety certificate, known as the BS7671. Please ensure you keep this certificate in a safe place for future reference.

Remember: MD Bespoke Solutions is a NICEIC Approved Contractor. All of the work our contractors do is guaranteed for six years, and we’re registered with TrustMark and Checkatrade for your complete peace of mind.

For a no obligation quote on replacing your fuseboard in Pimlico, Surrey or London, contact us today.

So happy with the service. Fast and tidy and even saved me money on the quote too.

June Faygate, Streatham

Needed a new consumer unit after fitting a new kitchen. Absolutely impressed with Michael and his team

K Avery, Esher, Surrey
Definitely recommend MD Bespoke after they replaced all the lights in my flat to LED. Saved me so much money and the finish is amazing
Robert Holloway, Streatham

Need help with your electrics, building work or more?

Our specialist team are on-hand to help guide you through the steps and keep your premises safe.

Call us now on 020 8265 2061 / 07476 661 777